F2000X upgraded flow integrator

Product Series

The flow integrator collects, displays, controls, transmits, communicates, prints, and processes various signals such as temperature, pressure, and flow on site, forming a digital acquisition system and control system. It is suitable for flow accumulation measurement and control of various liquids, general gases, superheated steam, and saturated steam; It can be used in conjunction with various flow sensors or transmitters to adapt to various measurement and control scenarios. It adopts mature and widely produced AI series instrument universal hardware, combined with excellent flow integrator software, making the instrument feature rich functions, easy programming, good anti-interference, high reliability, fast delivery, low cost and low price.

Product Features:

·Using a linear transformer power supply, the ripple is smaller and the stability is high,

·Convenient to set up, supports intelligent guidance settings

·The distribution adopts a 12V/24V dual tap design, and the dual distribution is not grounded together, resulting in better on-site anti-interference performance

·Can be equipped with convenient system management software to achieve systematic management of multiple instruments

·Can support custom transmission output for any measurement value (instantaneous flow rate, temperature, pressure optional)

Non standard support:

·Support OEM customization of surface stickers

·Support customized communication protocols

·Supports 12V/24V power supply

·Support customization of F-LINK management system

Installation method:

·Step 1: Push the instrument into the installation hole from the front of the installation panel (please use a steel plate). The thickness of the installation panel is (1.5~4.5) mm.

·Step 2: Install the instrument panel using the mounting bracket as shown in the diagram above (one bracket is installed on each side of the instrument panel, and the screws used for the instrument panel mounting bracket are M3 standard screws).

·Step 3: After installing the instrument panel, you can connect the signal and power lines.

Send The Information To The Supplier